Our Products
MDB – Main Distribution Board:
- COMPLIED AS PER IEC 61439-1
- RATED OPERATION VOLTAGE UP TO 1000V AC
- RANGES FROM 800A TO 6300A
- FAULTS WITHSTAND 50KA/3 SEC, 85KA/1 SEC, 100KA/1 SEC
- FORM 2B, FORM – 4 TYPE 6 & FORM – 4 TYPE 7
- INGRESS PROTECTION OF IP 54 AND IP42
- FRONT AND REAR ACCESS
- TOP OR BOTTOM CABLE ENTRY
- METERING INSTRUMENTS AS PER CUSTOMER REQUIREMENTS
- INCOMER FIXED DRAW-OUT ACB / MCCB
- OUTGOING BREAKERS ARE EITHER FIXED, PLUG-IN, OR DRAW OUT
- AUTOMATIC TRANSFER CONTROL AS REQUIRED [CONTROLLER OR PLC]
- HDHC 99.99% PURITY TIN-COATED BUSBAR
- INCOMER/OUTGOING BUS DUCT FLANGE INTERCONNECTIONS
- AVAILABLE IN RAL – 9002, RAL 7035 AND RAL 7032
- PROVISIONS FOR BMS INTEGRATION
SMDB – Sub Main Distribution Board
- COMPLETED AS PER IEC 61439-1
- RATED RANGES FROM 100A TO 2500A
- FAULT WITHSTAND 50KA/36KA/25KA/1 SEC.
- FORM 2B, FORM – 4B, TYPE 6 / TYPE 7 CONSTRUCTION
- FLOOR OR WALL MOUNTING TYPE
- INGRESS PROTECTION OF IP 42, IP 55, & IP 65
- FRONT & REAR CABLING ACCESS
- TOP OR BOTTOM CABLE ENTRY WITH REMOVABLE GLAND PLATES
- METERING INSTRUMENTS AS PER CUSTOMER REQUIREMENTS
- INCOMING & OUTGOING WITH FIXED/PLUG IN/DOT DEVICE
- INCOMER WITH ISOLATOR /MCCB/NON-AUTO MCCB TYPE
- INCOMER & OUTGOING DEVICES WITH BMS FACILITY IF REQUIRED
MCC – Motor Control Centers
- RANGES FROM 63A TO 6300A
- FAULT WITHSTAND 50KA/3 SEC, 85KA/1 SEC, 100KA/1 SEC
- FORM 2B, FORM – 4 TYPE 6 & FORM – 4 TYPE 7
- MCC PANEL IN COMPLETE DRAW-OUT CONSTRUCTION
- FLOOR OR WALL MOUNTING TYPE
- INGRESS PROTECTION OF IP 54, AND IP 42
- FRONT / REAR CABLING ACCESS
- TOP OR BOTTOM CABLE ENTRY WITH REMOVABLE GLAND PLATES
- METERING INSTRUMENTS AS PER CUSTOMER REQUIREMENTS
- INCOMING & OUTGOING WITH FIXED/PLUGIN/DOT DEVICE
- INCOMING WITH ACB / ISOLATOR /MCCB/NON-AUTO ACB / MCCB
- OUTGOING DEVICE WITH DOL/STAR DELTA/SOFT STARTER/VFD/THYRISTOR CONTROLS
- MCC PANELS WITH PLC & HMI FOR CONTROL AND MONITORING
Final Distribution Board
- COMPLETED AS PER IEC 61439-1
- RATED RANGES FROM 100A TO 2500A
- FAULT WITHSTAND 50KA/36KA/25KA/1 SEC.
- FORM 2B, FORM – 4B, TYPE 6 / TYPE 7 CONSTRUCTION
- FLOOR OR WALL MOUNTING TYPE
- INGRESS PROTECTION OF IP 42, IP 55, & IP 65
- FRONT & REAR CABLING ACCESS
- TOP OR BOTTOM CABLE ENTRY WITH REMOVABLE GLAND PLATES
- METERING INSTRUMENTS AS PER CUSTOMER REQUIREMENTS
- INCOMING & OUTGOING WITH FIXED/PLUG IN/DOT DEVICE
- INCOMER WITH ISOLATOR /MCCB/NON-AUTO MCCB TYPE
- INCOMER & OUTGOING DEVICES WITH BMS FACILITY IF REQUIRED
Capacitor Bank Panels
- COMPLIANCE WITH IEC 61439-1 FOR BUSBAR SYSTEMS WITH COMPONENTS LIKE MCCB AND ACB
- COMPLETE SOLUTIONS FOR AUTOMATIC POWER FACTOR
- RANGES FROM 25KVAR TO 1000KVAR WITH & WITHOUT DETUNED REACTORS
- DETUNED REACTOR TUNING ORDER 2.7 (135 HZ), 3.8 (190 HZ) AND 4.3 (215 HZ)
- STEP START INDICATION AT THE FRONT DOOR
- MANUAL OPTION FOR STEPS ON / OFF
- REACTIVE POWER REQUIREMENT STUDY
ATS Panels
- RANGES FROM 40A TO 6300A O FLOOR / WALL MOUNTING TYPE
- INGRESS PROTECTION OF IP42/IP54 / IP65
- FRONT/REAR CABLING ACCESS
- TOP OR BOTTOM CABLE ENTRY WITH REMOVABLE GLAND PLATES
- OPTIONAL METERING INSTRUMENTS FOR BOTH INCOMERS ATS WITH 4P ACB / MCCB / CONTACTOR
- MICROPROCESSOR BASED ATS CONTROLLER
- ATS CONTROL WITH PLC LOGIC.
Generator Control Panels
- COMPLIANCE WITH IEC 61439-1
- LOAD MANAGER, REVERSE POWER PROTECTION, EARTH FAULT, AUTO/MANUAL SYNCHRONIZATION,
- DUAL VOLT METER, DUAL FREQUENCY METER ALL COMES IN ONE PANEL.
- INTEGRATED WITH PLC LOGIC AND MICROPROCESSOR BASED RELAYS.
- DESIGNED FOR BOTH WITHDRAWABLE AND FIXED VERSIONS OF COMPONENTS.
- ELECTRICAL DISTRIBUTION BY USING COMPONENTS LIKE MCCB & ACBS.
- INTEGRATED ELECTRICAL GOVERNOR SYSTEM WITH THE DIFFERENCES IN VOLTAGE, FREQUENCY AND PHASE ANGLE SET.
- HOOTER-ALARM ANNUNCIATION FOR FAIL TO START.
- TEST SWITCH CONTROLS FOR HEALTHY START AND STOP.
- COMPLETE INTEGRATED SOLUTIONS
Synchronizing Panels
- RANGES UP TO 6300A
- FLOOR MOUNTING TYPE
- INGRESS PROTECTION OF IP 54
- LOAD TRANSFER BY ACB/MCCB
- FRONT AND REAR CABLING ACCESS
- TOP OR BOTTOM CABLE ENTRY WITH REMOVABLE GLAND PLATES
Totalization Panels
- COMBINATIONS OF LOAD TRANSFER BY ACB / MCCB / CONTACTOR
- PROTECTION CLASS UP TO IP 54
- LOAD SHARING/LOAD SHEDDING
- AUTOMATIC AND MANUAL SYNCHRONIZING
- FACTORY BUILT TO CLIENT’S SPECIFICATIONS
- RATINGS UP TO 6300 A
- CONTROL FUNCTIONS FOR ENGINE MONITORING, WARM-UP AND COOL-DOWN PERIODS,
- EMERGENCY SHUTDOWN, MULTI-ATTEMPT ENGINE START CONTROL, ENGINE TEST RUNS
Site Socket Panels
- RELIABLE CONTACTS PREVENT STOPS AND POWER BREAKS
- TOUGH & SAFE ARE PRODUCTS FOR DEMANDING APPLICATIONS AND ENVIRONMENTS
- SOCKETS WITH ADDITIONAL SAFETY FUNCTIONS
- SAFE INDUSTRIAL PLUGS, CONNECTORS, INLETS AND SOCKET OUTLETS WITH SCREWLESS
- TERMINAL CONNECTORS
- FACTORY BUILT TO CLIENT’S SPECIFICATIONS
- PROTECTION CLASS UP TO IP 65 WITH CANOPY ENCLOSURE
Pump Starter Panels
- RANGES AS PER CLIENT REQUIREMENT
- FAULT WITHSTAND 25KA / 36KA / 50KA /1SEC
- FLOOR/WALL MOUNTING TYPE
- INGRESS PROTECTION OF IP54 / IP65
- FRONT/REAR CABLING ACCESS
- TOP OR BOTTOM CABLE ENTRY WITH REMOVABLE GLAND PLATES
- METERING INSTRUMENTS AS PER CUSTOMER REQUIREMENTS
- INCOMER & OUTGOING DEVICES WITH BMS INTIGIRATION IF REQUIRED
- DOL/STAR DELTA/SOFT STARTER/VFD/THYRISTOR CONTROLS
- PANELS WITH PLC & HMI FOR CONTROL AND MONITORING
Feeder Pillars
- RANGES UPTO 3200A, 65/50KA FAULT LEVEL
- INCOMER ACB, MCCB, ISOLATORS, VERTICAL FUSE SWITCH
- OUTGOING VERTICAL STRIP FUSEWAYS UPTO SIZE II WITH DIN TYPE FUSE / MCCB
- METERING INSTRUMENTS AS PER CUSTOMER REQUIREMENTS
- 2MM / 3MM / 5MM THICK GALVANISED SHEET STEEL, SS AND ALUMINIUM CONSTRUCTION
- IP 65 INGRESS PROTECTION
Lighting Control Panels
- FORM 2 WITH IP65
- FLOOR MOUNTING TYPE O SHEET STEEL/STAINLESS STEEL/ALUMINUM – SINGLE /DOUBLE WALL
- BOTTOM CABLE ENTRY WITH REMOVABLE GLAND PLATES
- SPECIAL CONTROL SYSTEMS AS PER CLIENT REQUIREMENT
- AUTO OPERATION WITH PHOTOCELL + TIMER CONTROL
PLC / Automation Panels
- I/O RANGES AS PER CLIENT REQUIREMENT
- PLC, HMI, RTU, AND SCADA – REPUTED BRANDS
- INTEGRATION WITH ALL MAJOR AUTOMATION BRANDS
- SPECIAL SOLUTIONS FOR WATER, WASTEWATER, HVAC, POWER & ENERGY
- BUILDINGS, OIL & GAS AND OTHER INDUSTRIES
- PLC-BASED MCC, ATS, SMOKE DICTIONS AND FIRE ALARMS
DDC / BMS Control Panels
- FLOOR / WALL MOUNTING TYPE
- INGRESS PROTECTION OF IP54 / IP65
- TOP OR BOTTOM CABLE ENTRY WITH REMOVABLE GLAND PLATES O DIGITAL
- INPUTS TO MONITOR THE ON/OFF STATUS FROM SWITCHES/CONTACTORS
- ANALOGUE OUTPUT IS TO CONTROL THE FIELD ACTUATOR DEVICES.
- DIGITAL OUTPUT IS TO CONTROL RELAY OR PROVIDE LOW VOLTAGES
- BOOST ENERGY EFFICIENCY THROUGH PROGRAMMABLE OPERATIONS SEQUENCES
MIMIC Panels
- SUPER BRIGHT LEDS WITH A VIEWING RANGE OF 100 METERS
- GROUND FAULT DETECTION IN THE LOOP
- VISULA INDICATION OF FAULT AND SUPERVISORY SUCH POWER FAILURE
- FLOOR / WALL MOUNTING TYPE
- CONTAINS CUSTOM SIMPLIFIED LAYOUT OF THE INFRASTRUCRE
- FRONT VIEW AS PER BUILDING VIEW
Isolator Panels
- RANGES UP TO 2500A
- SINGLE POLE / THREE POLE
- NATURAL / ONLOAD / OFFLOAD / DISCONNECT / MOTORIZED
- MOTORIZED / MANUAL MODE OF OPERATION
- FLOOR WALL MOUNTING TYPE O CUSTOM-BUILT ISOLATOR PANELS WITH VARIOUS INTERLOCKS
- INDOOR AND OUTDOOR APPLICATIONS
- SIX POLE ISOLATOR PANELS FOR MOTORS
IPS / Hospital Panels
- PROVIDING ISOLATION FOR CRITICAL LOADS ESPECIALLY IN EMERGENCY & OPERATING ROOMS IN HOSPITALS
- MAINTAINING THE SECURITY AND SAFETY OF PATIENT
- PREVENTING THE POWER INTERRUPTION
- MONITORING & CONTROL OF INDIVIDUAL CIRCUIT / EQUIPMENT
- MENU ADJUSTMENT ON LCD SCREEN
- DATA TRANSMISSION THROUGH RS232/485
- TRANSFER LESS THAN 5MS
- DETERMINATION OF FAULT LOCATION
- CUSTOMIZING THE PANEL ACCORDING TO PROJECT
Meter Cabinets
- ELECTRIC COMPONENTS LIKE MCCB
- SINGLE PHASE & THREE PHASE AND CT OPERATED THREE PHASE METERS.
- DESIGNED TO WITHSTAND ELEVATED TEMPERATURES.
- CUSTOMERS’ FULL SATISFACTION IN TERMS OF RELIABILITY & SAFETY.
- COMPLIANCE WITH LOCAL REGULATIONS AND OTHER REGULATORY
